YTA610-JA1A2DN/FU1 | Yokogawa YTA610 Temperature Transmitter

FU1:

4-20mA:

[Instrinsically safe approval/non-incendive approval]

  Applicable standard: Class 3600:2011, Class 3610:2015, Class 3611:2004, Class 3810:2005,
ANSI/ISA-60079-0:2013, ANSI/ISA-60079-11:2014, NEMA 250:2003, ANSI/IEC 60529:2004 (R2011)

  Intrinsically safe for

    Class I, II, III Division 1, Groups A, B, C, D, E, F, G, T5…T4

    Class I Zone 0 AEx ia IIC T5…T4

  Non-incendive for

    Class I, II, Division 2, Groups A, B, C, D, F, G, T5…T4

    Class III, Division 1 T5…T4

    Class I Zone Group IIC T5…T4

  Ambient Temperature: -40 to 70?C for T4, -40 to 50?C for T5

  Enclosure Type 4X, IP66/IP67 in accordance with only IEC 60529

  Entity Parameters:

  Intrinsically safe for

    Supply/Output circuit: Ui=30V, li=200mA, Pi=1.0W, Ci-22nF, Li=0mH

    Sensor circuit: Uo=6V, Io=90mA, Po=135mW, Co=10?F, Lo=3.9mH

  Non-incendive for

    Supply/Output circuit: Ui=30V, Ci=22nF, Li=0mH

    Sensor circuit: Uo=6V, Io=90mA, Po=135mW, Co=10?F, Lo=3.9mH

  Dielectric strength: 500 V a.c.r.m.s., 1 min

  [+, -, C, 1, 2, 3, 4, 5] to Earth terminal

  [+, -, C] to [1, 2, 3, 4, 5]

[Explosionproof approval]

  Applicable standard: Class 3600, Class 3615, Class 3810, ANSI/NEMA 250

  Class I, Division 1, Groups A, B, C, D.;

  Class II/III, Division 1, Groups E, F and G.

  ‘FACTORY SEALD, CONDUIT SEAL NOT REQUIRED.’

  Enclosure Ratings: TYPE 4X

  Temperature Class: T6

  Ambient Temperature: -40 to 60?C (-40 to 140?F)

  Electrical Connection: 1/2NPT female?